Is there a way to insulate the sidelights around front door?

Question

They have small windows at the top and just the one layer of wood around them and the bottom half.

Susan Laverty-Osborn · Answer

Cut some bubble wrap to the size of each pane, Spray the glass with water and apply the bubble wrap. Easy to do and just as easy to remove. @Joyce Howe

Gail Salminen · Answer

@Joyce Howe it would be easier to respond if you posted a pic of the area. Not sure if these side lights are inside our out - could require a different answer depending on the location.

Connie · Answer

I had a stained glass window made for my side light. The original window was left in and the new one was layered over on the inside. The molding was moved and then replaced and chalked after the window was installed Looks great and fits the style of my house.

Joyce Howe · Answer

Thank you for the suggestions but this doesn't answer my question because I am not concerned with the glass area, but rather the wood area.

Gail Salminen · Answer

@Joyce Howe if it is the light fixture it self they have kits at home supply shops that insulate around light fixtures as well as outlets. If it is the door itself, there are products for this purpose as well. Determine where the draft is coming from and consult with the home supply store as to the best solution. Perhaps you just need to replace the the draft strip at the bottom of the door, or caulk around the the windows inside and out.

SLS Construction & Building Solutions LLC · Answer

3 ways - Exterior Storm, Interior Storm or blue/pink foam applied directly to it (for interior storm - http://www.hometalk.com/diy/repair/windows/interior-storm-window-one-option-amp-a-diy-how-to-717495) Curious why you are more worried about the wood as compared to the glass - do you feel drafts, or...

David Gnida · Answer

Spray foam you can buy at the store might be a little to strong for a light fixture. I wouldn't really recommend that. Maybe caulk everything up. All the gaps and cracks. Any holes you can see. Use weatherproof/ waterproof 100% silicone. That's what I would do. Close up all the crevices and air and water won't get through.

David Gnida · Answer

Thought u meant actual lighting. Caulk everything up still.

Deb K · Answer

Hi Joyce, hope this helps you out. You could try to add some Styrofoam SM insulation to the interior panels that are losing the heat, then you could cover that with another panel with a pattern on it. Paint them the same color as it was. Add a little bit off molding on the edges to cover things up. it can be made to look great. I hope I explained this so it's understandable.

Mogie · Answer

If you don't mind the side lights being completely blocked big box stores sell rolls of silver looking insulation. Cut to size and place over the side lights.

If the light is important to you then consider the kits that are sold every fall all over the US. Walmart is the first place that comes to mind. These are the type that you cut to size and fit usually shrink to fit with a blow dryer.

Is there a way to insulate the sidelights around front door?

Interior Storm Window: One Option & a DIY How To

Suggested Project Book

Save Your Pennies For These 12 Jaw Dropping Decor Ideas

Other

More

Is there a way to insulate the sidelights around front door?

Interior Storm Window: One Option & a DIY How To

Suggested Project Book